How do I install a clothes rod in a closet that has a slanted ceiling on one end? - closet rod toronto
I have 2 closets of the bedrooms, each with a slanted ceiling on one end. Clostet As you see, is the tendency on the left side.
I would like to install a clothes rod in each, but later left inclined, there is nothing on the rod holder in the last screw.
What can be done / slanted side of the wardrobe on the left side, so that you can screw the rod holder?
Friday, December 11, 2009
Closet Rod Toronto How Do I Install A Clothes Rod In A Closet That Has A Slanted Ceiling On One End?
4 comments:
Use a wooden stick, 1 1 / 4 is standard. You may find that the staff in the house tank, usually in the core section. You can use 1x6 on each side. Holes for the bar you want. Cut the stem cells from the same angle as the wall on one side and cut straight. Slide the 1x6 pieces on the pole and fastened to the wall
PS want a 1x6 to drill at the same angle as the wall of the rod to pass through
I want to avoid the rings to ... Pitched roof? This suggests that the enterprise directly under the roof ... For lifting rings to work, I would jump on a bar, where you are standing at the bar. Since the beams are in 2-foot centers, the odds are against you ... Suppose you're lucky, though, and it is to screw an eye screw in the beam path is simply not a good idea. The beams are notched where they meet the walls, already weakened at the base. This is not a place you want something hard, like hanging clothes.
I suggest building a simple bookcase at the end of the roof of your wardrobe that goes diagonally from floor to bottom edge. Arrange the tray 2x4 and double up as a heading. Cut a piece to fill the top 2Xwhatever small and lays the rod. In this way you only lose what they essentually space, which can in any case useless, even more cargo space in the cupboard and a door clothing.
If you really want to be in this good, you close theRod at the top of the frame and keep shelf space at the top in the area where the roof through the corners. I would do so only if the place is really useful.
Good luck!
SD --
Do not worry about bias, worry: we have the Office Bar and the weight of clothes.
Heres an idea. You can cut a 2x4 piece of wood to go through the wall, the rod end has somthing to live.
Then stopped 2x4 channels. Visualize your front door in his room. The door frame is what we want, could be used in a wood 2x4 or 1x4 construction.
or instead of the door frame, you can build a framework of T, the 2x4 to 2x4 and in the middle of the trunk of a frame t what you need. The T is where the weight is in the middle of the bar. For T frame could come with a piece of wood, probably a 2x4x10 feet.
The width of the cabinet to the pole game, then measure from the floor to the underside of the 2x4. Allow compression of the carpet with wood weight down. So you know how long buy 2x4 or 8 meters or 10 meters to cost the work in the background and T approximately $ 4 to do.
In the construction that is has not even nail on the 2x4 partially furnished. Mount the rOD in another wall, then measure the distance to the closet bar and cut the cane with the difference, maybe 1/16th inch.
This will solve your problem. A few pieces of 2x4 or 1x4s will cost less than $ 10 and no damage to the walls of the cabinet. 2x4 recommended stronger. Clothes can be very difficult.
I hope that helps my creative idea.
PS - If you do not have a saw, cut, Home Depot, if you have any measurements or visit a Web site or reduce man free practical builders.
Please vote for my favorite answer.
Use some eye bolts in the ceiling and attach the string / wire / nylon / whatever ... with screws and add it to your bar. In this way, you may need to adjust the length of each side, keeping the height of the hanging.
Post a Comment